|
|
|
Water pump for Dmax LB7 and LLY
Genuine GM/AC Delco pump for Dmax LB7 and
LLY. Pump only no cover. Due to the tendency of
the press fit to be insufficient allowing the
impeller to spin we weld the hubs to the shaft on
all of these pumps. These kits do include gaskets
and orings, but the water pump outlet gasket is a
cheap paper one so I suggest using the one listed
below.
|
|
|
|
Water pump for Dmax LBZ, LMM, LML
This is the proper AC Delco OE replacement
pump with the composite impeller. The composite
impeller does not have the issues with slip like
the cast ones do therefore no need to weld
anything. Includes new cover. These pumps do not
include any additional seals or gaskets. See
below.
|
|
|
|
Water pump outlet gasket
This is the gasket for the outlet of the
water pump where it connects to the steel pipe
that leads back to the oil cooler. Fits LB7 thru
LML water pumps.
|
|
|
|
Water pump to bypass oring
This is the oring that seals the connection
between the water pump and the bypass tube that
connects to the thermostat crossover. Fits LB7
thru LML.
|
|
|
|
Water pump to engine oring
This oring seals the water pump to the
timing cover/crankcase. They are typically
reusable multiple times, but some prefer to
replace them. Fits LB7-LML engines.
|
|
|
|
|
