Kennedy Diesel

6.2/6.5 GM || Lift Pump - 6.2/6.5 Parts

Click on the Item Name for more detailed information.
Item Information	Purchase Options

Kennedy Lift Pump for 6.5

Same pump that we use on the Duramax with special fitttings to plumb directly into the OE lines. This should be the last lift pump you ever buy!

"Please note that this pump is a centrifugal design. It will not prime itself upon installation and requires a leak free system so as not to lose it's prime. The best way to prime/bleed it is by applying light pressure to the tank with the filter bleeder open OR via suction from a hand vacuum pump (Mighty vac) or oil suction gun applied to the filter drain hose. Once this has been done start the engine with the pump off and run or drive for a bit then apply power." -JK

Lift pump control harness for 6.5

Complete control harness uses digital circuitry to cover all power supply issues and incorporates a non load carrying oil psi safety switch to ensure that pump does not run when engine is not running. It also includes a "one shot" primer function that energizes the pump for several seconds at key up to prime the fuel system at startup like most modern EFI vehicles do. There is also a manual push button to override the control circuit when bleeding filters!

Lift pumps (inline electric)

Genuine GM-AC Delco inline electric lift pump. I have found this to be the best one available.

"I use this model on ALL 6.2/6.5 with factory equipped with inline electric lift pump. - JK

Oil Pressure sender/switch

This is the switch that controls operation of the lift pump on late model (92up) 6.5's when the engine is running.

澳门威尼1818_首頁(欢迎您)